In this post I will try to clarify how to get a basic MPLS setup running. We will configure 6 routers in a lab setup and we will get some IP traffic through MPLS. The goal is not to explain all the details of MPLS, the goal is to get a setup running to see […]
EX4600/QFX5100 – Do not install a copper transceiver in an access port directly above or below another copper transceiver
Just saw this in a Juniper Document Never thought about that. Anyway, I never saw a functional problem with it. But I guess they created the warning for any damage created on the chassis caused by those SFP’s. (they are a big bigger then optical sfp’s). CAUTION Do not install a copper transceiver in an
Hi all I had to install some switches this week for a customer. I thought it might be interesting to share the config and explain why I did what. The config was for a company with not the most network knowledge, so I tried to simplify some things. I will explain further on.
This is an explanation how to configure vMX routers for VXLAN with Multicast control plane. The configuration can be used on MX routers with maybe some small adaptations. I didn’t try to run this config on a hardware MX router. For people interested in getting the JNCIP-DC certification. This is one of the topics required
How to set up an IPsec tunnel between a pfSense Firewall and a Juniper vSRX firewall. PfSense is a leading open source firewall distribution. Junos vSRX is Juniper’s firewall or security router. In this article we go into how to configure site to site VPNs between the two different vendors.